YAMAHA POWER AMPLIFIER PX10
ราคา : 42,000 บาท *ราคารวมภาษีแล้ว
YAMAHA PX10 Power Amplifier
- 2x 1000W at 8Ω
- 2x 1200W at 4Ω
- Newly developed Class-D amplifier engine with a custom LSI
- Flexible onboard PEQ, crossover, filters, delay, and limiter functions
- Yamaha Speaker presets
- Utlities for safe and secure operation
specification
Sampling frequency rate : 48kHz
A/D D/A Converters : AD/DA: 24-bit linear, 128 times over sampling
Total harmonic distortion : 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
Frequency response : ±1.0dB (1W, 8Ω, 20Hz to 20kHz)
S/N ratio : 101dB (A-weighted, 8Ω, Gain setting = +14dBu)
Crosstalk : Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)
Voltage Gain/Sensitivity : 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)
Maximum input voltage : +24dBu
Input impedance : 20kΩ (Balance), 10kΩ (Unbalance)
Indicators : POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature
Processors : Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
Latency : 1.5 msec (Analog Input to Speakers)
Amplifier class : Class D, Balanced output circuit (BTL)
Dimensions : W 480mm (18-7/8") H 88mm (3-7/16"): 2U D 388mm (15-2/8")
Net weight : 7.4 kg (16.31 lbs)
Accessories : USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1
A/D D/A Converters : AD/DA: 24-bit linear, 128 times over sampling
Total harmonic distortion : 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
Frequency response : ±1.0dB (1W, 8Ω, 20Hz to 20kHz)
S/N ratio : 101dB (A-weighted, 8Ω, Gain setting = +14dBu)
Crosstalk : Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)
Voltage Gain/Sensitivity : 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)
Maximum input voltage : +24dBu
Input impedance : 20kΩ (Balance), 10kΩ (Unbalance)
Indicators : POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature
Processors : Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
Latency : 1.5 msec (Analog Input to Speakers)
Amplifier class : Class D, Balanced output circuit (BTL)
Dimensions : W 480mm (18-7/8") H 88mm (3-7/16"): 2U D 388mm (15-2/8")
Net weight : 7.4 kg (16.31 lbs)
Accessories : USB cover, Owner's Manual, Specification sheet, AC cable (2.0m) x 1